1 12

Ezy Anchor Starter Pack - With Carry Bag

$99.00
SKU: EASP

Delivery and Shipping

Domestic Shipping (Australia) 

  • Standard shipping policy is $5 flat rate shipping for orders under $50 and free shipping for all orders over $50. 
  • All orders are dispatched from our warehouse in Brisbane, QLD, Australia.
  • Please allow up to 7 days for delivery as delivery times vary depending on your location and shipping delays. 

For more information on Shipping, Returns & Exchanges, please visit here.

If you have any further questions, feel free to email us at adventure@tredoutdoors.com 

Description

The Starter Pack Plus is designed for Caravanners, Campers and others who want to start with a multipurpose pack that covers the use of the Ezy Anchors in the hard red and gravelly dirt of the Outback and also sandy loam soils such as Coastal Caravan parks.

Package Includes:

  • 8 x Ezy Anchors
  • 4 x 200mm Long Outback Screws
  • 4 x 280mm Long Coastal Screws
  • 1 x Torx T50 Driver 
  • 1 x Carry Bag

These packs have been determined by months of personal use and testing in both types of the areas detailed above and also research throughout Central and Outback Australia.

We thank you for your purchase and wish you many years of happy use of your Ezy Anchors!

**Ezy Anchor supports Australian Business and Jobs**

*We cannot accept responsibility for damage and injuries caused by misuse.

Installation:

  1. Take your cordless drill or impact driver
  2. Connect the Torx driver bit to the drill/driver and secure in the chuck
  3. Pick up your Ezy Anchor with screw in position through the Ezy Anchor
  4. Connect your guy rope to the hook
  5. Hold the guy rope and hook together with your guiding hand
  6. Pick up the drill and driver in your driving hand
  7. Insert the Torx driver into the head of the screw
  8. Place drill in forward drilling position
  9. Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle.
  10. Installation complete

Should you strike a solid object whilst installing the screw, remove and reposition the screw to another position close to or adjacent to the original required position.

Removal:

  1. With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head.
  2. Hold the hook and guy rope in one hand, place drill in reverse and screw out.
  3. Removal complete

*In the event of a flat battery you can connect a shifting spanner to the driver bit shaft and unscrew manually to a point where you can remove the screw from the ground.
**Remember to regularly charge your drill or impact driver battery.

REVIEWS
TRED IN THE WILD

  • Free Shipping

    On all orders over $50

  • Australia-wide Dealers

    Hundreds of dealers Australia-wide

  • Easy returns

    Hassle free returns policy

  • Australian Made

    Proudly Australian Made Recovery Boards
TRED Australia

Ezy Anchor Starter Pack - With Carry Bag

$99.00

The Starter Pack Plus is designed for Caravanners, Campers and others who want to start with a multipurpose pack that covers the use of the Ezy Anchors in the hard red and gravelly dirt of the Outback and also sandy loam soils such as Coastal Caravan parks.

Package Includes:

These packs have been determined by months of personal use and testing in both types of the areas detailed above and also research throughout Central and Outback Australia.

We thank you for your purchase and wish you many years of happy use of your Ezy Anchors!

**Ezy Anchor supports Australian Business and Jobs**

*We cannot accept responsibility for damage and injuries caused by misuse.

Installation:

  1. Take your cordless drill or impact driver
  2. Connect the Torx driver bit to the drill/driver and secure in the chuck
  3. Pick up your Ezy Anchor with screw in position through the Ezy Anchor
  4. Connect your guy rope to the hook
  5. Hold the guy rope and hook together with your guiding hand
  6. Pick up the drill and driver in your driving hand
  7. Insert the Torx driver into the head of the screw
  8. Place drill in forward drilling position
  9. Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle.
  10. Installation complete

Should you strike a solid object whilst installing the screw, remove and reposition the screw to another position close to or adjacent to the original required position.

Removal:

  1. With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head.
  2. Hold the hook and guy rope in one hand, place drill in reverse and screw out.
  3. Removal complete

*In the event of a flat battery you can connect a shifting spanner to the driver bit shaft and unscrew manually to a point where you can remove the screw from the ground.
**Remember to regularly charge your drill or impact driver battery.

View product
Back to top